--- title: "The Appliances page" slug: "appliances-page-v7-0" description: "ExploreAppGate ZTNA appliances, their configurations, health monitoring, and management features for secure access to resources in your enterprise." tags: ["Appliances", "Appliance Configuration", "Appliance Functions", "Appliance Management", "Appliance Health Status"] updated: 2026-10-05T18:09:24Z published: 2026-10-05T18:09:24Z canonical: "support.appgate.com/appliances-page-v7-0" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.appgate.com/llms.txt > Use this file to discover all available pages before exploring further. # The Appliances page An appliance is the virtual or physical instance on which the system is running. A group of appliances is referred to as the Collective. Each appliance is a stateless, configurable machine that can operate as one or a combination of the following: - [***Controller***](/v1/docs/adding-a-controller-v7-0). The first appliance you configure. The Controller is the central point of administration for AppGate ZTNA. It is a stateless appliance with an internal database used to store system configuration. - [***Gateway***](/v1/docs/adding-a-gateway-v7-0). An enforcement point, responsible for controlling user access to protected resources. - [***Connection Broker***](/v1/docs/adding-a-connection-broker-v7-0)*.* Handles NAT traversal in AppGate ZTNA. - [***Connector***](/v1/docs/adding-a-connector-v7-0). Extends connectivity to remote sites and unmanaged resources without requiring the use of a standalone Client. - [***Portal***](/v1/docs/adding-a-portal-v7-0). Hosts a web frontend, allowing browser-based access for multiple users without requiring the use of a standalone Client. - [***LogServer***](/v1/docs/adding-a-logserver-v7-0). Collects logs from other members of the Collective. - [***LogForwarder***](/v1/docs/adding-a-logforwarder-v7-0). Collects, groups, and securely distributes audit logs within an enterprise environment. - [***Metrics Aggregator***](/v1/docs/adding-a-metrics-aggregator-v7-0). Collects, groups, and securely exports Prometheus metrics for an enterprise environment. - [***Telemetry Aggregator***](/v1/docs/adding-a-telemetry-aggregator-v7-0). Centralizes and manages the flow of observability data across the Collective. ![](https://cdn.us.document360.io/e7482ce5-acfa-4c3b-b76c-b6c32472644a/Images/Documentation/AppGate-Topology-Diagram.png?sv=2026-02-06&spr=https&st=2026-11-21T21%3A39%3A56Z&se=2026-11-21T22%3A39%3A56Z&sr=b&sp=r&sig=Zv3zRDD%2Bn4nUoMWjnYoR30ON%2B0YMtTeB8SmcVpydCYs%3D) The **Appliances** page contains all appliances you have configured in the Collective. You can switch between two layouts: *Default* and *Stats.* Each layout displays different information to help you monitor appliance configuration and health. --- ## Default Layout The Default layout includes the following columns: - ***Name***. The name of the appliance. - ***Status***. The current health status of the appliance. Possible values are: *Healthy*, *Busy*, *Error*, *Not active*, *Offline*, or *Warning*. Click the status to open [Appliance Health Details](/v1/docs/appliances-page-v7-0#appliance-health-details). - ***Hostname***. The appliance hostname. - ***Functions***. The function or functions assigned to the appliance. - ***Site***. The Site associated with the appliance. - ***Tags***. Tags applied to the appliance. - ***Last Modified***. The date and time when the appliance was last updated. --- ## Stats Layout The Stats layout includes the following columns: - ***Name***. The name of the appliance. - ***Status***. The current health status of the appliance. Can be *Healthy*, *Busy*, *Error*, *Not active*, *Offline*, or *Warning*. - ***Functions***. The function or functions assigned to the appliance. - ***Site***. The Site associated with the appliance. - ***Version***. The AppGate ZTNA version running on the appliance. - ***Sessions***. The number of active user sessions. - ***CPU***. CPU usage as a percentage. - ***Memory***. Memory usage as a percentage. - ***Disk***. Disk usage as a percentage. --- ## Appliance Health Details Clicking an appliance status opens the **Appliance Health Details** window, which displays the following information: - ***Appliance name***. The name of the selected appliance. - ***Appliance Health***. The overall health status of the appliance: - *Busy*. The appliance is connected and performing an action, such as starting up. - *Error*. The appliance is connected but not healthy. - *Healthy*. The appliance is correctly configured and functioning. - *Not active*. The appliance has not yet been activated. - *Offline*. The appliance is activated but not connected to a Controller. - *Warning*. The appliance is connected but not healthy. - ***Function(s) Health***. Health status for configured functions, such as Controller, Gateway, LogServer, LogForwarder, Portal, Connector, or Metrics Aggregator. - ***Upgrade Status***. Displays *Idle* unless an upgrade is in progress. - ***Appliance Metrics***. CPU, memory, and disk throughput (percent) for the busiest NIC and IP addresses. > [!NOTE] > NOTE > > The system does not use a swap partition. If memory usage remains consistently high, upgrade the appliance or add another appliance. See the [Instance sizing](/v1/docs/instance-sizing-v7-0) section for CPU, memory, and disk requirements. - ***Network***. Displays the following network metrics: - RX speed - TX speed - Busiest NIC - Dropped inbound packets - Dropped outbound packets - IP addresses on `eth0` - ***Appliance Customization***. The name of the currently active appliance customization. --- ## Filtering and Sorting Appliances Use the ***Search*** field to filter the **Appliances** page. For example, entering “healthy controller” displays appliances with the Controller function with a *Healthy* status. Click on a column header to sort that column. > [!NOTE] > NOTE > > If a customization is installed, it appears in the ***Version*** column with “(c)”. --- ## Managing appliances The **Actions** button provides the following bulk options: - ***Add Tag***. Apply a tag to one or more appliances. - ***Remove Tag***. Remove a tag from one or more appliances. - ***Configure from Source***. Replace fields in a target appliance or appliances with settings from a source appliance. Select the target appliance(s), then select *Configure from Source.* In the window that appears, select the source appliance and the fields to copy. Select **Replace Fields**, and the selected settings are applied to all target appliances. ![Configuration settings for bulk actions.](https://cdn.us.document360.io/e7482ce5-acfa-4c3b-b76c-b6c32472644a/Images/Documentation/ag63_configure-from-source.png?sv=2026-02-06&spr=https&st=2026-11-21T21%3A39%3A56Z&se=2026-11-21T22%3A39%3A56Z&sr=b&sp=r&sig=JYZDf3UtaYvu6nn26LKx5956fvAxkXkUUU9NS7IhNpI%3D) More appliance actions are available by selecting the three dots icon (![Three circular shapes stacked vertically on a dark background, selected to access a menu.](https://cdn.us.document360.io/e7482ce5-acfa-4c3b-b76c-b6c32472644a/Images/Documentation/three_dots.png?sv=2026-02-06&spr=https&st=2026-11-21T21%3A39%3A56Z&se=2026-11-21T22%3A39%3A56Z&sr=b&sp=r&sig=DTfb%2Fgm4y4daSyz4nbVjiRiuKQCS99fdAWz4UggSRpg%3D)) next to each appliance. The actions are: - ***Reboot***. Restarts the appliance. - ***Renew Certificate***. Renews the appliance certificate. This is required after changing appliance settings. > [!NOTE] > NOTE > > The appliance is temporarily deactivated until certificate renewal is completed. Active AppGate Client connections will be reconnect automatically. > [!NOTE] > NOTE > > Changing the appliance hostname or IP automatically renews the certificate. The appliance status may briefly appear as *Not Active*. - ***Download Logs***. Downloads a .zip file containing all the appliance’s daemon logs. - ***Deactivate***. Deactivates the appliance and sets its status to *Not Active*. This removes all configurations and re-enables the *Export seed file/ISO* action. > [!NOTE] > NOTE > > You cannot deactivate a functioning Controller. First disable the Controller function and wait for the status to become Healthy. - ***Suspend/Resume***. Gateways only. Suspends and resumes new connections. The Gateway can also auto-suspend. - ***Run Commands***. Opens the **Run Commands** window. You can run up to five commands concurrently from the following list: - `addressshow` - `dig` - `ip route show` - `netcat` - `nptq` - `ping` - `tcpdump` - `traceroute` For commands with a *Timeout* field, specify the duration in seconds. - ***Export seed file/ISO***. Available only when the appliance status is *Not Active*. Use this option to configure a new appliance using a seed file. See [Activating an appliance](/v1/docs/activating-an-appliance-v7-0) for more information.