--- title: "Client Routing" slug: "client-routing-v6-5" description: "Configure Client routes effectively with Entitlement and Subnet Based Routing to optimize traffic to your Site's Gateways." updated: 2025-12-04T16:54:34Z published: 2025-12-04T16:54:34Z canonical: "support.appgate.com/client-routing-v6-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.appgate.com/llms.txt > Use this file to discover all available pages before exploring further. # Client Routing This section defines the configuration of the Client routes, ensuring the users' traffic is directed to one of the Site's Gateways. Understand more about how [Routing Client traffic](/v1/docs/routing-client-traffic) works in the Appgate SDP system. ***Type of Routing*** *Entitlement Based Routing* The Gateway will send resolved Entitlements to the Client. These will be used to configure the required routes to the Sites. EBR is enabled by default. *Subnet Based Routing* Static subnets will be used by the Client to configure routes to Sites. They may be used with Entitlement Based Routing. Add a subnet and a note to help identify its use. If you add 0.0.0.0/0 to capture all the traffic towards this Site - this will be translated into two routes in the Clients: 0.0.0.0/1 and 128.0.0.0/1. *Route all traffic through tunnel (Default Gateway)* All other Client traffic will be routed to this Site in the Collective which will serve as the default gateway. Remember to add suitable Entitlements for this Site. ![List of network actions allowing various protocols and ports for traffic management.](https://cdn.us.document360.io/e7482ce5-acfa-4c3b-b76c-b6c32472644a/Images/Documentation/ag62-def_ents.png?sv=2026-02-06&spr=https&st=2026-11-22T20%3A48%3A44Z&se=2026-11-22T21%3A48%3A44Z&sr=b&sp=r&sig=O6gT0jhmXd%2FDZbIz1dnsv%2FRqAzfJO1LhHYIaaPuBOBw%3D) *Excluded Subnets* It might be a requirement to exclude certain Subnets from the default gateway Site such as IP addresses on the local network. Use the same format here as for Subnet Based Routing. > [!NOTE] > **NOTE** > > If Advanced Ringfence is enabled then these Excluded Subnets will be honored and not blocked. Appgate SDP (Software Defined Perimeter) is a security solution that provides secure access to resources based on user identity and context, leveraging a zero trust security model. A defined access right or permission granted to users or devices, allowing them to access specific resources or functionalities within the Appgate ZTNA system. An appliance that acts as an enforcement point, controlling user access to protected resources.