--- title: "Common Criteria" slug: "common-criteria-v7-0" description: "Learn how to install AppGate ZTNA clients with NIAP protection profile mode enabled for enhanced security and compliance." tags: ["NIAP", "Protection Profile", "Common Criteria"] updated: 2026-09-08T19:45:32Z published: 2026-09-08T19:45:32Z canonical: "support.appgate.com/common-criteria-v7-0" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.appgate.com/llms.txt > Use this file to discover all available pages before exploring further. # Common Criteria This section covers the National Information Assurance Partnership (NIAP) Common Criteria certification for AppGate ZTNA version 6.4 (6.4.2) clients. It describes how to install the AppGate ZTNA client with NIAP protection profile (PP) mode enabled. For more information about the certification, see [NIAP's page for AppGate](https://www.niap-ccevs.org/products/11493). For more information on client installation, see the [Installing and updating clients](/v1/docs/installing-and-updating-clients-v7-0) section. The download links below are for the specific versions used as the Target of Evaluation (TOE): | Client | Download | | --- | --- | | Windows | [https://bin.appgate-sdp.com/6.4/client/Appgate-SDP-6.4.2-Installer.exe](https://bin.appgate-sdp.com/6.4/client/Appgate-SDP-6.4.2-Installer.exe) | | macOS | [https://bin.appgate-sdp.com/6.4/client/Appgate-SDP-6.4.2-Installer.dmg](https://bin.appgate-sdp.com/6.4/client/Appgate-SDP-6.4.2-Installer.dmg) | --- ## Enabling NIAP PP mode on the first Controller When setting the first Controller, you can enable PP mode using the cz-setup utility: ![Configuration screen for appliance setup, highlighting protection profile and customization options.](https://cdn.us.document360.io/e7482ce5-acfa-4c3b-b76c-b6c32472644a/Images/Documentation/ppmode_setup.png?sv=2026-02-06&spr=https&st=2026-11-21T21%3A39%3A59Z&se=2026-11-21T22%3A39%3A59Z&sr=b&sp=r&sig=BbU0UFD9bTknuEKi6zWG49gATjt0XQCO%2BM3DbwYBe1M%3D) 1. In the **Seed -** **Configure appliance as first Controller** menu, select **Protection Profile**. 2. Select **Yes**, then select **OK**. 3. See [Configuring the first Controller and enabling the Gateway](/v1/docs/configuring-the-first-controller-v7-0) for information on the the rest of the settings in cz-setup. 4. Select **Apply configuration** when you are done. --- ## Install the AppGate client for Windows in NIAP PP mode To install the AppGate ZTNA client for Windows in NIAP PP mode, run the following command: `appgate-sdp-installer.exe /Y` ### Import the Collective CA certificate Onboarding profile links do not work in NIAP PP mode unless an administrator manually imports the AppGate ZTNA Collective's CA certificate into the workstation's device certificate store. To import the certificate: 1. Open `mmc.exe` as an administrator. 2. Select **File** and select **Add/Remove Snap-in**. 3. In the **Add** **or Remove Snap-ins** window, select **Certificates** and select **Add**. 4. In the **Certificates** snap-in window, select **Computer account**, select **Next**, select **Local Computer**, and select **Finish**. 5. In the **Add or Remove Snap-ins** window, select **OK**. 6. Go to **Console Root\Certificates (Local Computer)\Appgate)**. Right-click the **Appgate** folder and select ***All Tasks***, then select ***Import***. 7. In the **Certificate Import Wizard**, browse to the CA certificate on your machine and complete the wizard to import it. ### Set the certificate friendly name The Controller name must match the friendly name of the certificate. To edit the friendly name after importing: 1. Double-click the certificate to open its details. 2. In the **Details** tab, select *Edit Properties*. 3. In the **General** tab, enter the Collective name (for example, `sdp-controllers.example.com`) in the **Friendly name** field and select **OK**. You can now use the onboarding profile link to create a profile and connect to AppGate ZTNA. ### Import the certificate using PowerShell (optional) You can use a PowerShell script to import the certificate and set the friendly name in a single step: ```powershell # Specify the path and file name of the Collective’s CA certificate $caFilename = ".\sdp-controllers_example_com.cer" # Import the specified Appgate CA cert and get the thumbprint $cert=(Import-Certificate "$caFilename" -CertStoreLocation Cert:\LocalMachine\Appgate) # set the friendlyname of the cert - this step is required $cert.FriendlyName = "sdp-controllers.example.com" ``` --- ## Install the AppGate client for macOS in NIAP PP mode 1. Open the AppGate ZTNA installer `.dmg` file. This file includes programs for installing and uninstalling the client. 2. Open AppGate ZTNA Installer.pkg to start the setup wizard. 3. Review the terms and conditions, select **Continue**, then select **Agree**. 4. Select the default destination, select **Install for all users of this computer**, select **Continue***,* and select **Install**. When the installation completes, select **Close**. The client installs in its default configuration. To enable NIAP PP mode, run the following command from the user's home directory: ```plaintext sudo defaults write /Library/Preferences/com.appgate.sdp.plist protection_profile -bool true ``` ### Add the root CA certificate to the trust store After installation, add the root CA certificate to the trust store: 1. Take the PEM formatted root CA certificate and remove all headers, footers, and newlines. The result looks like the following: `MIIC7zCCAdegAwIBAgIIJNWMVQB03h8wDQYJKoZIhvcNAQELBQAwE=ANBgkqhkiG9w0BAQEFAAOCAQ****` Copy this value—you will use it as the `<base64 cert>` in the next step. 1. From the user’s home directory, run the following command: ```plaintext Sudo security add-internet-password -a agca-cert- -j “Appgate SDP Client” -w -l “Appgate SDP Client” -s “Appgate SDP Client” -T /Library/Application\ Support/Appgate/Appgate\ Service.app ``` In this command, `<ZTNA FQDN>` is the fully qualified domain name (FQDN) of the Controller and `<base64 cert>` is the value obtained in the previous step. --- ## Verify that AppGate clients connect in NIAP PP mode To confirm that a client is running in NIAP PP mode: 1. In the Controller’s admin UI, go to **Usage**, then **Active Sessions**. 2. Selecta session to open the **Session Details** and select the ***Device Claims*** tab. 3. Find the `PPModeEnabled` claim. If it is set to `true`, NIAP PP mode is enabled for that client.