--- title: "Configuring AnyConnect Alongside AppGate SDP" slug: "configuring-anyconnect-alongside-appgate-sdp-2" updated: 2026-01-07T15:43:36Z published: 2026-01-07T15:43:36Z canonical: "support.appgate.com/configuring-anyconnect-alongside-appgate-sdp-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.appgate.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring AnyConnect Alongside AppGate SDP This document describes a method for configuring Cisco Remote Access VPN policies to allow the AnyConnect agent (Cisco Secure Client) to coincide with the AppGate SDP client on a workstation. The method described below is just one way to allow for interoperability, and there are most likely several other configuration options that can be implemented to achieve the same goal. ## Prerequisites Mutually exclusive subnets for AppGate and Cisco so that there is no IP overlap between the AnyConnect policies and the AppGate policies. ## AppGate Configuration Checklist - Make sure that “tamper proofing” is not being enforced per [AppGate Device Policies](/v1/docs/configure-policies-v6-6-1#device-policy). - Make sure that none of the site’s within your collective are set up as a default Gateway for end user traffic. - Take note of the subnet(s) that AppGate will be providing secure access to. - Take note of the IP addresses of all AppGate Controllers and relevant gateways. ## Cisco Configuration Steps 1. Open ASDM and login. 2. Navigate to Configuration -> Remote Access VPN -> and expand the Network (client) Access tree. 3. Click on **Group Policies** and either add or modify a group Policy for this use case. 4. Within the **Group Policy Configuration**, on the left hand side, expand the **Advanced** tree and click on **Split Tunneling**. 5. Next to **Policy**, make sure that **Inherit** is unchecked and select **“Exclude network list below”** from the drop down. 6. Next to **Network List**, make sure that **Inherit** is unchecked and click **Manage** next to the drop down. 7. Within the manage window, add a new **ACL**, and then add **ACE**s that contain the exclusive subnets and the IPs of all relevant AppGate appliances (Controllers and gateways). Make sure the **Action** is set to **permit**. 8. Click **OK** which will bring you back to the split tunnel policy page and select the new **ACL** that you configured in step 7 from the drop down next to **Network List**. 9. Click OK and then navigate to the Secure Client Connection Profiles, under Network (client) Access. 10. Either add or modify a **Connection Profile**. 11. Select the group policy configured above, from the drop down next to **Group Policy**. 12. Make sure the client address pools and authentication are set the way you like it and save the changes. ## Validation Log into AnyConnect and AppGate on the same machine and confirm that you can access resources behind both solutions. An appliance that acts as an enforcement point, controlling user access to protected resources. A Policy is a set of rules that govern access control and permissions for users and devices within the Appgate ZTNA system. Policies determine what resources users can access based on their entitlements.