--- title: "Hardware appliance spec" slug: "hardware-appliance-spec-v7-0" description: "Explore AppGate ZTNA's affordable, high-performance appliances with flexible specifications for optimal user capacity and network activity." tags: ["Hardware", "Hardware Specification"] updated: 2026-09-21T14:03:07Z published: 2026-09-21T14:03:07Z canonical: "support.appgate.com/hardware-appliance-spec-v7-0" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.appgate.com/llms.txt > Use this file to discover all available pages before exploring further. # Hardware appliance spec AppGate ZTNA is available on the following physical appliance models, specified to deliver both affordability and high performance. --- ## Specifications The following table describes the specifications for each appliance model: | Parameter | Ax-M2 | AX-J | | --- | --- | --- | | **Primary and** **Secondary usage** | - Connector - Gateway/LogForwarder (only one at a time) | - Controller/PortalGateway - LogServer | | **Concurrent Users (GW)** | 100-250 maximum per unit* | 5,000-10,000 maximum per unit* | | **Throughput** | 0.85Gb/s maximum | 50 Gb/s maximum | | **Memory** | 8GB | 16GB | | **CPU(s)x** | 1x Intel® Pentium® J6426 2.0Ghz, 4C | Intel® Xeon® 6 Performance 6517P 3.2G, 16C/32T, 24GT/s, 72M Cache, Turbo, (190W) DDR5-6400 | | **Disk(s)** | 1x SSD SATA 128GB | 480GB SSD SATA Mixed Use 6Gbps 5 12 2.5in Hot-plug AG Drive, 3 DWPD | | **Networkx** | 4x 1Gb RJ45 Ethernet | 4x 1Gb RJ45, 4x 25Gb SFP28 Ethernet (SFP+ supported) ^ | | **Power Supply Unit** | Single external | Dual 800 W redundant hot pluggable | | **Management** | n/a | iDRAC10, Enterprise 17G | | Parameter | Ax-M2 | AX-J | Ax-G7 | Ax-H5 | | --- | --- | --- | --- | --- | | **Primary and** **Secondary usage** | - Connector - Gateway/LogForwarder (only one at a time) | - Controller/PortalGateway - LogServer | - Gateway/Controller - Connector/LogForwarder/LogServer | - Controller/Portal/Gateway - LogServer | | **Concurrent Users (GW)** | 100-250 maximum per unit* | 5,000-10,000 maximum per unit* | 2,000-4,000 maximum per unit* | 4,000-8,000 maximum per unit* | | **Throughput** | 0.85Gb/s maximum | 50 Gb/s maximum | 23Gb/s maximum | 23Gb/s maximum | | **Memory** | 8GB | 16GB | 16GB | 64GB | | **CPU(s)x** | 1x Intel® Pentium® J6426 2.0Ghz, 4C | Intel® Xeon® 6 Performance 6517P 3.2G, 16C/32T, 24GT/s, 72M Cache, Turbo, (190W) DDR5-6400 | 1x Intel® Xeon® E-2488 3.2GHz, 8C/16T | 1 x Intel® Xeon® Gold 6526Y 2.8GHz, 16C/32T | | **Disk(s)** | 1x SSD SATA 128GB | 480GB SSD SATA Mixed Use 6Gbps 5 12 2.5in Hot-plug AG Drive, 3 DWPD | 2x SSD SATA 6G 480GB RAID1 | 2x SSD SATA 6G 480GB Cached RAID1 | | **Networkx** | 4x 1Gb RJ45 Ethernet | 4x 1Gb RJ45, 4x 25Gb SFP28 Ethernet (SFP+ supported) ^ | 2x 1Gb RJ45, 2x 10/25Gb SFP28 Ethernet (SFP+ supported) ^ | 2x 1Gb RJ45 & 4x 10/25Gb SFP28 Ethernet (SFP+ supported) ^ | | **Power Supply Unit** | Single external | Dual 800 W redundant hot pluggable | Dual 700W redundant hot pluggable | Dual 700W redundant hot pluggable | | **Management** | n/a | iDRAC10, Enterprise 17G | iDRAC9, Enterprise 16G | iDRAC9, Enterprise 16G | x Due to component availability, the exact CPU and network specifications may vary from those shown. * Concurrent user capacity depends on the number of users and the complexity of entitlements. Memory requirements relate to the number of users and the complexity of associated conditions. CPU requirements relate to network activity and the frequency of condition changes. > [!NOTE] > NOTE > > Individual users can achieve speeds up to the typical 1 GbE interface speed of their device. ^ Ax-J appliances use Intel® E810-XXV network adapters with two or four 10/25Gb SFP28 ports. To use these ports, SFP28 connector modules must be added. SFP+ connector modules are also compatible but are limited to 10 Gb. **Connector modules are not included with the appliance, as they are typically part of the cable assembly. These are standard networking components that must be purchased locally to suit your switches. AppGate does not sell or supply these items.** For details, see the [25Gb Intel data sheet](https://ark.intel.com/content/www/us/en/ark/products/184820/intel-ethernet-network-adapter-e810xxvda4-for-ocp-3-0.html). ^ The Ax-J, Ax-G, Ax-H appliances use Intel® E810-XXV network adapters with two or four 10/25Gb SFP28 ports. To use these ports, SFP28 connector modules must be added. SFP+ connector modules are also compatible but are limited to 10 Gb. **Connector modules are not included with the appliance, as they are typically part of the cable assembly. These are standard networking components that must be purchased locally to suit your switches. AppGate does not sell or supply these items.** For details, see the [25Gb Intel data sheet](https://ark.intel.com/content/www/us/en/ark/products/184820/intel-ethernet-network-adapter-e810xxvda4-for-ocp-3-0.html). ### Rear views Interface numbering in the rear view corresponds to the interface numbers used in an [appliance’s System Settings](/v1/docs/adding-a-new-appliance-v7-0#system-settings). For example, interface 1 appears as `eth1` in the admin UI. The exact appearance of the rear panel may vary from the layout shown below. ![Diagram showing network ports and power supply units for Ax-J configuration.](https://cdn.us.document360.io/e7482ce5-acfa-4c3b-b76c-b6c32472644a/Images/Documentation/axj_diagram.png?sv=2026-02-06&spr=https&st=2026-11-21T21%3A40%3A01Z&se=2026-11-21T22%3A40%3A01Z&sr=b&sp=r&sig=b%2B%2FIXmAc6NsyM%2BEPwJ90nqs9ExOhYLru4rtkKW6bXhk%3D) ![Diagram showing PSU connections with labeled numbers and positions for configuration.](https://cdn.us.document360.io/e7482ce5-acfa-4c3b-b76c-b6c32472644a/Images/Documentation/hw_nics.png?sv=2026-02-06&spr=https&st=2026-11-21T21%3A40%3A01Z&se=2026-11-21T22%3A40%3A01Z&sr=b&sp=r&sig=aEPPiAL5ne6Ytuu0MxYto8DbZbOHV4ACY9rw%2FQReHJo%3D)