--- title: "High Availability Configuration" slug: "high-availability-configuration-v6-5" updated: 2025-10-31T18:25:43Z published: 2025-10-31T18:25:43Z canonical: "support.appgate.com/high-availability-configuration-v6-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.appgate.com/llms.txt > Use this file to discover all available pages before exploring further. # High Availability Configuration Two **Connectors** can operate together in an active-passive configuration to provide HA operation. By assigning the same VIP to a pair of Connectors - They will operate together, one always being active. You can configure either an IPv4 VIP or an IPv6 VIP. ***IPv4 Appliance Interface*** Select the IPv4 interface for the shared VIP. ***IPv4 VIP*** Enter the virtual IP to be shared between the two Connector appliances. ***IPv6 Appliance Interface*** Select the IPv6 interface for the shared VIP. ***IPv6 VIP*** Enter the virtual IP to be shared between the two Connector appliances. > [!NOTE] > **NOTE** > > When using HA - if you change the VIP, you need to remember to change the configuration of the other Connector that shares the VIP or you will end up with a broken configuration. The virtual or physical instance on which the system is running. Each appliance is a stateless, configurable machine that can operate as a single function or a combination of functions. A component that extends connectivity to remote sites and unmanaged resources without requiring the use of a standalone Client.