--- title: "Routing Internet Traffic through AppGate SDP" slug: "routing-internet-traffic-through-appgate-sdp" description: "Learn how to disable split tunneling in AppGateand route all traffic through a secure tunnel for enhanced security and network management." updated: 2026-01-09T13:22:58Z published: 2026-01-09T13:22:58Z canonical: "support.appgate.com/routing-internet-traffic-through-appgate-sdp" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.appgate.com/llms.txt > Use this file to discover all available pages before exploring further. # Routing Internet Traffic through AppGate SDP By default, AppGate SDP performs split tunneling, which allows a user to access dissimilar security domains like a public network (e.g., the internet) and a local LAN or WAN at the same time. Entitlement based routing or subnet-based routing captures and routes traffic for any protected hosts, and all other traffic (e.g. internet traffic) is untouched by AppGate SDP. To disable split tunneling, establish a default Gateway, and route all internet traffic using an AppGate SDP Site: 1. Define a separate Site to be used as the destination for the default gateway traffic. 2. In the AppGate SDP Admin user interface, navigate to: 1. **System>Sites >Client Routing** 2. enable **Route all traffic through tunnel (Default Gateway)** for the defined Site. This allows all remaining traffic to be captured and routed to the specified Site, which will serve as the default gateway (where traffic could, for instance, be filtered before being allowed out to the internet). 3. use the **Excluded Subnets** form to specify any subnets that need to be excluded from the default gateway Site. (e.g., private subnets such as 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16) 3. In the AppGate SDP Admin user interface, navigate to 1. **System>Appliances> < Functions>** This setting causes the **Allowed** destination(s) to include any routable destination out the specified interface(s). As long as the outside interface has a default route configured it will route the traffic. The default router should include a path to the internet. 1. **Secure Tunnel Settings** 1. **Client Tunneling - Allow Destinations** 1. verify that the **Address** and **Subnet Mask** fields are blank. 2. verify that the **Interface** field is set to the internet-facing interface. **NOTE:** If there are multiple interfaces, you will require a second **Allowed** destination entry for the inside interface. 4. Remember to grant users an Entitlement that allows all protocols and ports (port range 1-65535) to 0.0.0.0/0 in Access >Entitlements >Actions for the Site where you want to route all traffic. https://yourappgate.com:8443/ui/access/entitlements/create See the following sections of the AppGate SDP Admin Guide for more information on establishing a default gateway and routing all traffic through the AppGate SDP tunnel: [Routing Clients to the Internet via AppGate](/v1/docs/routing-client-traffic-v6-6#default-gateway) [Routing Client Traffic](/v1/docs/routing-client-traffic-v6-6) A defined access right or permission granted to users or devices, allowing them to access specific resources or functionalities within the Appgate ZTNA system. An appliance that acts as an enforcement point, controlling user access to protected resources. The virtual or physical instance on which the system is running. Each appliance is a stateless, configurable machine that can operate as a single function or a combination of functions.