--- title: "Secure Tunnel Settings" slug: "secure-tunnel-settings-v6-5" updated: 2026-01-14T16:18:17Z published: 2026-01-14T16:18:17Z canonical: "support.appgate.com/secure-tunnel-settings-v6-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.appgate.com/llms.txt > Use this file to discover all available pages before exploring further. # Secure Tunnel Settings ***Client Hostname/IP*** This hostname is only used to advise Clients where to find this Appliance. Use only fully qualified domain names or IPv4 / IPv6 address. > [!NOTE] > **NOTE** > > You must renew the appliance certificate after changing the Client Hostname or Client connections will fail. > [!NOTE] > NOTE > > For an Appgate Gateway to allow clients to create tunnels using either IPv4 or IPv6, the Gateway must be configured with a single FQDN that has both an IPv4 A record and IPv6 AAAA record for that FQDN in public DNS. ***Local Client Tunneling - Load Balancing Weighting Factor*** This weighting factor can be set independently of the external one. > [!NOTE] > **NOTE** > > Before changing the weighting factor please refer to the detailed explanation in the manual. ***Connect via Local Network*** When a Client is on the local LAN it will connect using the Local Client hostname/IP(s) instead of the external one. ***Client Tunneling - Allowed Destinations*** List the destinations the Gateway will allow (firewall rule) for secure tunnel traffic. ***Client Tunnel DTLS/QUIC Port*** For a Gateway appliance, this is used for DTLS protocol tunneling between Gateway and Client, default 443. The virtual or physical instance on which the system is running. Each appliance is a stateless, configurable machine that can operate as a single function or a combination of functions. An appliance that acts as an enforcement point, controlling user access to protected resources.