---
title: "Complete the High Availability Configuration fields for Connectors"
slug: "high-availability-configuration-v6-7"
description: "Two Connectors can operate together in an active-passive configuration to provide high availability (HA) operation. Complete the High Availability fields to configure HA for Connectors."
tags: ["Connector", "High Availability"]
updated: 2026-03-16T19:20:48Z
published: 2026-04-03T16:41:06Z
canonical: "support.appgate.com/high-availability-configuration-v6-7"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.appgate.com/llms.txt
> Use this file to discover all available pages before exploring further.

# High Availability Configuration

Two **Connectors** can operate together in an active-passive configuration to provide high availability (HA) operation. By assigning the same VIP to a pair of Connectors they will operate together, with one always active. You can configure either an IPv4 VIP or an IPv6 VIP.

Complete the following fields to configure HA:

- ***IPv4 Appliance Interface.*** Select the IPv4 interface for the shared VIP.
- ***IPv4 VIP.*** Enter the virtual IP to be shared between the two Connector appliances.
- ***IPv6 Appliance Interface.*** Select the IPv6 interface for the shared VIP.
- ***IPv6 VIP.*** Enter the virtual IP to be shared between the two Connector appliances.

> [!NOTE]
> **NOTE**
> 
> When using HA, if you change the VIP, you must change the configuration of the other Connector that shares the VIP or you will end up with a broken configuration.