This section covers the National Information Assurance Partnership (NIAP) Common Criteria certification for AppGate ZTNA version 6.4 (6.4.2) clients. It describes how to install the AppGate ZTNA client with NIAP protection profile (PP) mode enabled. For more information about the certification, see NIAP's page for AppGate. For more information on client installation, see the Installing and updating clients section.
The download links below are for the specific versions used as the Target of Evaluation (TOE):
Client | Download |
|---|---|
Windows | https://bin.appgate-sdp.com/6.4/client/Appgate-SDP-6.4.2-Installer.exe |
macOS | https://bin.appgate-sdp.com/6.4/client/Appgate-SDP-6.4.2-Installer.dmg |
Enabling NIAP PP mode on the first Controller
When setting the first Controller, you can enable PP mode using the cz-setup utility:

In the Seed - Configure appliance as first Controller menu, select Protection Profile.
Select Yes, then select OK.
See Configuring the first Controller and enabling the Gateway for information on the the rest of the settings in cz-setup.
Select Apply configuration when you are done.
Install the AppGate client for Windows in NIAP PP mode
To install the AppGate ZTNA client for Windows in NIAP PP mode, run the following command:
appgate-sdp-installer.exe /Y
Import the Collective CA certificate
Onboarding profile links do not work in NIAP PP mode unless an administrator manually imports the AppGate ZTNA Collective's CA certificate into the workstation's device certificate store. To import the certificate:
Open
mmc.exeas an administrator.Select File and select Add/Remove Snap-in.
In the Add or Remove Snap-ins window, select Certificates and select Add.
In the Certificates snap-in window, select Computer account, select Next, select Local Computer, and select Finish.
In the Add or Remove Snap-ins window, select OK.
Go to Console Root\Certificates (Local Computer)\Appgate). Right-click the Appgate folder and select All Tasks, then select Import.
In the Certificate Import Wizard, browse to the CA certificate on your machine and complete the wizard to import it.
Set the certificate friendly name
The Controller name must match the friendly name of the certificate. To edit the friendly name after importing:
Double-click the certificate to open its details.
In the Details tab, select Edit Properties.
In the General tab, enter the Collective name (for example,
sdp-controllers.example.com) in the Friendly name field and select OK.
You can now use the onboarding profile link to create a profile and connect to AppGate ZTNA.
Import the certificate using PowerShell (optional)
You can use a PowerShell script to import the certificate and set the friendly name in a single step:
# Specify the path and file name of the Collective’s CA certificate
$caFilename = ".\sdp-controllers_example_com.cer"
# Import the specified Appgate CA cert and get the thumbprint
$cert=(Import-Certificate "$caFilename" -CertStoreLocation Cert:\LocalMachine\Appgate)
# set the friendlyname of the cert - this step is required
$cert.FriendlyName = "sdp-controllers.example.com"Install the AppGate client for macOS in NIAP PP mode
Open the AppGate ZTNA installer
.dmgfile. This file includes programs for installing and uninstalling the client.Open AppGate ZTNA Installer.pkg to start the setup wizard.
Review the terms and conditions, select Continue, then select Agree.
Select the default destination, select Install for all users of this computer, select Continue, and select Install. When the installation completes, select Close.
The client installs in its default configuration. To enable NIAP PP mode, run the following command from the user's home directory:
sudo defaults write /Library/Preferences/com.appgate.sdp.plist protection_profile -bool trueAdd the root CA certificate to the trust store
After installation, add the root CA certificate to the trust store:
Take the PEM formatted root CA certificate and remove all headers, footers, and newlines. The result looks like the following:
MIIC7zCCAdegAwIBAgIIJNWMVQB03h8wDQYJKoZIhvcNAQELBQAwE=ANBgkqhkiG9w0BAQEFAAOCAQ****
Copy this value—you will use it as the <base64 cert> in the next step.
From the user’s home directory, run the following command:
Sudo security add-internet-password -a agca-cert-<SDP FQDN> -j “Appgate SDP Client” -w <base64 cert> -l “Appgate SDP Client” -s “Appgate SDP Client” -T /Library/Application\ Support/Appgate/Appgate\ Service.appIn this command, <ZTNA FQDN> is the fully qualified domain name (FQDN) of the Controller and <base64 cert> is the value obtained in the previous step.
Verify that AppGate clients connect in NIAP PP mode
To confirm that a client is running in NIAP PP mode:
In the Controller’s admin UI, go to Usage, then Active Sessions.
Selecta session to open the Session Details and select the Device Claims tab.
Find the
PPModeEnabledclaim. If it is set totrue, NIAP PP mode is enabled for that client.