Released November 9, 2026
New Features
AppGate for OT
AppGate for Operational Technology (OT) uses secure remote access (SRA) to give users controlled access to their assets. Through the Operational Technology, Brokered Access, and Session Governance user licenses, administrators can configure interactive, embedded SSH and RDP access to protected targets. It includes the following:
The Operational Technology license adds:
Reusable protocol templates that can be selected when adding an action to an entitlement.
Resolver support for the Claroty CTD platform for OT.
The Brokered Access license adds:
Two new entitlement types—Embedded SSH and Embedded RDP—with their own protocol-specific settings. A new column in the Entitlements page displays the type of entitlement.
Two new types of Secrets for injecting credentials: Credentials and SSH Key. Secrets outside of these categories are now called Generic.
The Session Governance license adds session recording and live monitoring with the following pages:
The Active Brokered Sessions page (Usage > Active Brokered Sessions) to track active sessions in the UI.
The Recorded Sessions page (Usage > Recorded Sessions) to allow users to maintain a historical record of recorded sessions and download them as needed.
NOTE
Brokered Access and Session Governance licenses do not require the Operational Technology license. You can use brokered RDP and SSH sessions and session governance for both IT and OT use cases.
Observability
The Observability feature license, formerly known as Digital Experience Monitoring, now enables appliances and clients to produce metrics, logs, and traces in OpenTelemetry format. You can send this telemetry into any security information and event management (SIEM) system or observability platform that accepts OpenTelemetry.
The new Telemetry Aggregator appliance function allows you to configure AppGate ZTNA to send telemetry data to your chosen observability platform.
Optimizer
You can now analyze entitlements in a Collective to reduce attack surface, address compliance requirements, and improve operational efficiency.
The Score column in the Entitlements page (Access > Entitlements) displays the optimization score for each entitlement. Selecting the score opens the Optimization Score Details window, from which you can optimize or disable the entitlement.
The Entitlement Optimizer widget in the Dashboard displays the percentage of optimized entitlements and a breakdown of how many need optimization.
Quantum-safe encryption
AppGate ZTNA’s first phase of quantum-safe encryption introduces post-quantum hybrid mode. In this mode, AppGate ZTNA performs both classical and post-quantum key exchanges and signatures in parallel and combines the results for added protection. This is the first step toward post-quantum cryptography approved by the National Institute of Standards and Technology (NIST), in line with guidance on quantum-safe migration from the Department of Defense (DoD), National Security Agency (NSA), and Cybersecurity and Infrastructure Security Agency (CISA).
As part of this work, AppGate ZTNA has removed the Datagram Transport Layer Security (DTLS), TLS 1.0/1.1 (TLSv23), and TLS 1.2 protocols—deprecated in 6.6—from both the backend and admin UI. AppGate ZTNA restricts upgrades where administrators still explicitly configure these protocols at the Site or override level.
Mobile Clients do not support Quantum-safe encryption. They will still be able to connect to appliances with quantum-safe encryption enabled, but the key exchange will only be classical.
Claroty CTD resolver
Added support for Claroty CTD resolvers to Site configuration as part of the Operational Technology license.
ColorTokens resolver
Added support for ColorTokens resolvers to Site configuration.
Support for large installations
The platform can now support larger installations with up to one million users.
Admin UI refresh
Updated the admin UI’s left-hand navigation and header for a cleaner, more consistent, and more efficient navigation experience:
The main menu is now on the left-hand side of the screen and highlights your current page.
You can pin and unpin the left-hand menu. When unpinned, the menu stays hidden and appears only when you select the menu icon.
The “Jump to” feature helps you quickly navigate the UI.
The user menu has moved to the bottom-left with a redesigned drop-down.
The notification and help menus have been redesigned and inline help has been moved into the new Help menu.
The search bar stays collapsed by default and is now accessed by clicking the magnifying glass button.
The verbose menu has been removed.
A new Keyboard Shortcuts modal is available from the new Help menu.
Updated the styling of modal dialog boxes throughout the admin UI for visual consistency.
The Dashboard now has a responsive layout rather than a static grid.
The
/homeshortcut URL to the Dashboard has been deprecated. If you have bookmarked/home, update your bookmark to point directly to the Dashboard.The admin messages panel has an updated design and improved keyboard navigation handling.
Appliance Updates
Admin UI
Updated the PKCS12 certificate upload experience to match the improved CSR upload flow.
The Items per page setting on list views per page is now saved in admin preferences, similar to how it saves layout and auto-refresh settings.
Updated the Test Name Resolver, View Policies Linked by Name, and View Policies Linked by Tags modal windows to more clearly display the name of the object they apply to in the header.
The Admin Roles, Criteria Scripts, and Ringfence Rules pages now have a View Linked Policies action per row; and the Entitlement Scripts page now has a View Linked Entitlements action per row. When selected, these actions display which policies or entitlements reference that object.
Fixed an issue where AppGate ZTNA did not apply an HTTPS certificate uploaded in the Admin/API TLS Connection settings of a Controller or LogServer appliance if the certificate name contained spaces. The admin UI continued to serve the previous certificate.
Added Client Users - Single Site, Brokered Access, and Session Governance gauges to the Licenses page (Setting > Licenses). The Users license has been renamed to Client Users.
Application Discovery.
Removed the Run Analysis button from the Discovered Apps page.
Authentication
You can now select which Subject Alternative Name (SAN) type the LDAP Certificate identity provider uses to map a client certificate to a user.
Improved credential handling during identity provider and MFA provider connection testing.
Addressed an issue in which identity provider (IdP) connection tests failed when the connection used a new secret.
Fixed an issue where LDAP IdPs configured with a hostname that contains an underscore ( _ ) failed to connect after upgrading.
Collective Replication
Resolved an issue where minor clock skew between Controllers could prevent collective replication from completing successfully.
Feature updates
Renamed the Digital Experience Monitoring license to Observability and the Application Discovery license is now included in the Optimizer license. The license server issues licenses under both the old and new names for backward compatibility, so no customer action is required.
Logging and monitoring
HTTPS is now enabled by default on appliance Prometheus Exporters.
Added a new audit log entry with the event type
tls_session_failedwhen an appliance encounters an issue establishing an HTTPS/TLS session. Each log entry includes the stage at which the failure occurred, a reason code, and relevant error details.Added the audit log event type
system_time_changed. This event records discontinuous jumps in system time, either forward or backward. It does not record continuous time skews, such as those caused by normal NTP operation.Added the following Prometheus metrics:
apn_audit_queue_maxlimit. The maximum number of audit logs that can be buffered before the system emits them to the configured destination.apn_audit_queue_total. The number of audit logs currently buffered and not yet emitted to the configured destination.
Name forwarding
Added a new
dnsfwd://prefix to clearly identify DNS forwarder entries. The existingdns://*.prefix continues to work for backward compatibility.Fixed an issue where the system assigned the same DNS forwarder IPv4 address to multiple newly-created Sites. Each new Site now receives a unique DNS forwarder address to ensure proper network configuration and prevent conflicts.
Fixed an issue where clients could not reach the DNS Forwarder or the telemetry collector on Sites that do not use Entitlement Based Routing (EBR).
NAT traversal
You can now configure the number of ports a Gateway keeps open with an advanced appliance setting.
Fixed an issue where a Gateway could stop making connections through the Connection Broker and show the appliance status error "Failed to init RNG". The Gateway now recovers on its own.
Fixed an issue where clients connected through a relayed NAT traversal connection were disconnected every two hours when certificate revocation lists were enabled.
Fixed an issue where Gateways using a QUIC signal channel took up to one minute to reconnect to the Connection Broker after a Connection Broker configuration reload. NAT traversal connections failed until the Gateways reconnected.
Networking
You can now specify the NTP version in the NTP server configuration for an appliance.
Portal
Administrators can now link custom subdomains to apps directly in a Portal appliance’s function settings. This makes DNS setup simpler, and internal domain names no longer need to be visible from the internet.
The Portal now follows DNS rules for specific domains. You no longer need a default DNS server if your domain-specific rules already cover the apps users need.
Portal client sessions now use a dynamic idle timeout instead of a fixed five-minute timeout. When the Portal is busy, it frees up the sessions that have been idle the longest first, so active users can keep working.
Improved Portal observability for troubleshooting. Portal logs are now cleaner and easier for support teams to follow.
REST API
Added the following API settings for the SAN type setting in LDAP Certificate IdPs:
Any. Default. The first usable entry found.OtherName. The Other Name entry.UserPrincipalName. The User Principal Name (UPN), which is a specific kind of Other Name. Common on Windows and smartcard logins.Rfc822Name. The email address.DnsName. The DNS name (hostname).UniformResourceIdentifier. The URI.
Fixed an issue where filter values returned by list endpoints came back in a different order on each request.
Security
Added protections to appliances against CVE-2026-98432. These protections apply automatically, and no action is required
Refined risk-based authentication challenges to reduce unnecessary verification prompts while maintaining appropriate security controls.
Added the ability to generate a Certificate Signing Request (CSR) for appliance certificates used for the admin UI and the LogServer.
Improved resilience against denial-of-service attacks.
Improved certificate revocation validation for LDAP Certificate identity providers. If you use certificates with OCSP extensions but not CRL DP extensions, ensure the OCSP URLs are reachable by the Controller or the LDAP Certificate IdP may stop functioning.
Stability
Reliability for adding additional Controllers has been improved.
Added a new healthcheck that detects entitlements that use the old resolver syntax. The healthcheck raises a warning, flagging the entitlements for migration to the current syntax.
Increased the maximum supported value for
max_replication_slots, supporting deployments with up to nine Controllers.Updated condition reevaluations to be timed relative to each user’s login time rather than a fixed clock interval.
Improved the error message shown when IP allocation fails, pointing administrators toward the likely cause, such as an IP pool assigned to more than one Site.
Fixed a performance issue during authorization on systems with a high number of CPUs.
Fixed an issue where custom ring-fencing (firewall) rules could unintentionally block NAT traversal attempts to Gateways.
Improved certificate revocation list (CRL) refresh handling and synchronization.
Fixed an issue where the IP pool utilization healthcheck reported an incorrect pool size when excluded IP ranges were configured.
Fixed an issue on Gateways causing intermittent client connection timeouts and retries on long-running appliances.
Fixed an issue where Certificate Revocation List (CRL) parsing could take a long time when a CRL contained a large number of entries.
Fixed an issue where the Connection Broker failed to detect a CRL refresh.
Improved reliability of Google Cloud Platform resource filtering on Gateways.
Fixed an issue in which event listeners were not recreated after the database crashed and restarted.
Fixed a performance regression in high-load URL access scenarios.
Fixed an issue where a Site override in one policy could cause other users to receive the same entitlement on the wrong Site or with missing actions until the entitlement configuration changed.
Fixed an issue where Gateway application health monitoring did not mark an application as unhealthy when a TCP connection attempt to that application returned an ICMP unreachable message. Because the application stayed marked as healthy, failover did not occur.
Upgrades
If a Site used QUIC in AppGate ZTNA 6.7 or earlier, the database stored its TLS version as TLSv23. The upgrade to 7.0 now changes this value to TLSv1.3 so the Site works with the 7.0 Controller. You don't need to take any action.
Client Updates
The lite client was substantially reworked to improve reliability and performance.
For desktop clients, route modifications are now performed on a separate thread instead of the main event thread.
Improved CRL downloading in the client: downloads now time out instead of stalling for a long time, and CRLs can be downloaded from IPv6 endpoints.
Fixed an issue where certain installer-provided default settings, such as attention mode, did not take effect because of invalid JSON in the client’s configuration template.
Addressed an issue where blue FIDO2 keys were not working.
Improved consistency and accuracy of client device attributes during authorization.
Fixed an issue where automatic updates could fail silently on some Fedora systems. Install this version manually to receive this fix.
Fixed an issue where the client didn’t reconnect to the network driver after the device woke from sleep.
Fixed an issue where the Windows client could turn off Remember me after an administrator updated a profile, which made the user sign in again manually.
Fixed an issue where the client triggered Collective failover after resuming from sleep even though the primary Controller had reconnected.
Updated Electron and .NET in the AppGate ZTNA client to resolve Brotli vulnerability CVE-2026-111497.
Android
Improved Android MDM configuration handling to support additional JSON data types in
ag_config, providing greater flexibility and compatibility with MDM platforms.Fixed an issue where pressing Back after opening the client from a notification signed the user out and disconnected the VPN tunnel.
iOS
Fixed an issue with the iOS QR code scanner when adding a new profile.
macOS
The macOS client now applies DNS settings faster.
The macOS client now detects when Background Task Management (BTM) disables its background helper services and warns the user when this occurs.
Fixed an issue where the client did not initially start after installation if the user disabled auto-start in the client settings.
Resolved an issue where the macOS client window rendered incorrectly when the system’s preferred languages included a right-to-left language.
Windows
The Windows client now properly handles Modern Standby’s resume and suspend states.